Modification of the fracture criterion for V-shaped notches (plane problem). Relationship between toughness and strength and structural parameters

A fracture criterion of the type of the Neuber-Novozhilov criterion is proposed to describe the fracture in the vicinity of the tip of a V-shaped notch under tensile and shear loading. In the proposed criterion, the limits of averaging of the stresses along the notch axis depend on the presence, location, and size of the initial defects in the material. The crystal lattice parameter of the initial material is chosen for the characteristic linear size. For a V-shaped notch subjected to tension and shear, simple equations are obtained that relate the stress intensity factors for the modified singularity coefficients, the singularity coefficients themselves, and the theoretical tensile and shear strengths of a single crystal of the material taking into account the damage to the material in the vicinity of the notch tip. The equations obtained allow a passage to the limit from a notch to a crack. It is shown that the classical critical stress intensity factor used in the strength analysis of cracked solids is not a material constant.Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 1, pp. 106–115, January–February, 2005.     

碳钢的高应力冲击磨损行为研究

在高应力冲击磨损条件下，金属材料的磨损表面很容易形成硬度很高（ＨＶ≥１０００）的白层．采用新的试验方法，研究了碳钢在高应力冲击条件下的磨损特征，并且从分析白层的结构出发，讨论了白层的形成机制和失效模式．结果表明，材料的高应力冲击磨损质量损失与冲击次数之间具有线性关系，韧性较好的低碳钢的耐磨性比高碳钢的好，原因是硬度越高，白层在磨损过程中越容易发生剥层与剥落．白层是一种高度塑性变形层，其内部精细结构的变形特征证实了白层的塑性变形机制     

压荷载下类岩石材料中的锯齿形裂纹分析

针对类岩石材料的复杂性和非均质性，特别是材料中一些强度相对较弱的晶界的存在等，对形状较为复杂的两种锯齿形裂纹：内张型滑动裂纹和单翼滑动裂纹的应力强度因子进行了分析．结合经典的滑动裂纹模型，讨论了裂纹起裂角、侧压以及翼裂长度等对应力强度因子的影响．分析的结果为进一步研究类岩石材料的断裂损伤机理提供了理论基础．     

混凝土与纤维混凝土的劈裂试验及损伤描述

描述工程材料在服役期间所受到的损伤，是评估其可靠度、耐久性等指标的重要依据，本文根据混凝土与纤维混凝土劈裂试验的结果，对一些损伤模型存在的问题进行的探讨认为：对于混凝土复合材料，卸载曲线的斜率受到粗骨料和纤维等因素的干扰，卸载刚度的衰减不能精确描述损伤的演化，并且，针对不同的极限状态，损伤描述应该有不同的形式，针对损伤对混凝土抗渗性能的影响问题，本文提出了损伤描述表达式。     

压-剪复合应力波作用下材料动态断裂韧性研究

提出亚微秒单脉冲应力波载荷作用下Ⅱ型裂纹的平板冲击实验技术 .加载率为dK dt～ 10 8MPa·m1 2 ·s-1.实验中由锰铜应力片和弹性波理论分别测定和计算了压应力 ;通过微观分析确定了动态裂纹的平均扩展长度 ;引进等效应力强度因子 ,用动态断裂理论确定了 6 0 #钢的动态断裂韧性KⅠd和KⅡd ;建立了亚微秒冲击载荷作用下确定材料动态断裂韧性的方法     

焦散线法对双折射材料断裂性能的研究

提出了双折射材料Ⅰ-Ⅱ混合型裂纹问题焦散线的形成原理,讨论了μ(=K_I/K_I)及光学各向异性系数ξ对焦散线形状及其几个特征量的影响,得到了双折射材料应力强度因子K_Ⅰ、K_Ⅱ的求法.以聚碳酸脂、环氧树脂为例,确定了它们在不同裂纹及不同载荷条件下的应力强度因子K_Ⅰ、K_Ⅱ.     

The Experimental Approach to Effective Stress Law of Coal Mass by Effect of Methane

Effective stress law of all kinds of coal samples, including steam coal, fat coal, corking coal, thin coal and anthracite, under pore pressure of gas, is experimentally studied using a newly developed test machine. These samples are taken from Coal Mines in Wuda, Hebi, Yanzhou, Yangquan, Qingshui, and Gujiao in China. The experiment results show that, under pore pressure of gas, the tested coal samples comply with Biots effective stress law, where the Biots coefficient is not a constant, and is bilinear function of volumetric stress () and pore pressure (p), that is, We define four areas according to the numerical feature of , that is, functionless area of pore pressure, normal function area, fracturing function area, and quasi-soil function area. The effective stress law of coal mass introduced by this paper is a constitutive equation in the study of coupled solid and fluid. This has significance in the drainage and outburst of methane in coal seam.     

Dynamic stress of a circular cavity buried in a semi-infinite functionally graded piezoelectric material subjected to shear waves

The paper presents a theoretical method to investigate the multiple scattering of shear waves and dynamic stress around a circular cavity in a semi-infinite functionally graded piezoelectric material. The analytical solutions of wave fields are expressed by employing wave function expansion method and the expanded mode coefficients are determined by satisfying the boundary conditions of the cavity. Image method is used to satisfy the free boundary condition of the semi-infinite structure. According to the analytical expression of this problem, the numerical solutions of the dynamic stress concentration factor around the cavity are presented. The effects of the piezoelectric property, the buried depth of the cavity, the incident wave number and the nonhomogeneous parameter of materials on the dynamic stress around the cavity are analyzed. Analyses show that the piezoelectric property has great effect on the dynamic stress in the region of intermediate frequency and the effect increases with increasing wave number. When the nonhomogeneous parameter of materials is less than zero, it has less influence on the maximum dynamic stress around the cavity; however, it has greater influence on the distribution of the dynamic stress around the cavity. When the nonhomogeneous parameter of materials is greater than zero, it has greater influence on both the maximum dynamic stress and the distribution of dynamic stress around the cavity, especially in the case that the buried depth is comparatively small.     

Stress relaxation,creep, and internal stresses in high density polyethylene filled with calcium carbonate

The effect of filling high density polyethylene (HDPE) with calcium carbonate (up to 50% by weight) on the stress relaxation and the creep in uniaxial extension at room temperature was investigated. The addition of CaCO₃ was found to have a strong influence on the flow behaviour of HDPE. In particular, it was observed that the internal stress level, calculated from relaxation data, increased markedly with the filler content. The reduction in creep rate of the filled samples suggested that the CaCO₃-particles induce a change in the structure of the HDPE-interphase close to the filler surface. This was supported by dynamic mechanical measurements performed at low temperatures on swollen HDPE-CaCO₃ samples.     

动态J积分及Rice J积分一致性比较与分析

首先回顾了动态J积分的发展进程,然后给出了两种常用动态J积分和Rice J积分的数学计算式,并对它们的一致性加以讨论,由此提出一种广义J积分的定义。然后通过算例,基于ANSYS软件,建立平面应变情形下纯I型中心裂纹模型,并利用编写的APDL程序计算了各个J积分,通过结果比较,进一步验证了在动态加载条件下,动态J积分比Rice J积分具有更好的路径守恒性,但仍可以看出它们的取值具有一定的一致性。最后,通过J积分间接法和裂尖位移外推法分别计算裂纹动态应力强度因子,所得结果吻合很好,验证了编写程序的正确性。